Using one of our RV spotless water systems makes washing a large RV far less of a daughting task. Most RV owners spend a large part of a day when washing their coach. This is because they have to towel dry afterwards to remove the water spots left behind by hard water.

You can now wash and rinse your RV in a fraction of the time, and allow to dry in the direct sunlight. You will have absolutely no water spots.

See the amazing reflection in the black paintwork of an RV just washed using one of our DI systems.

RV-spotless-water-systems

Our systems are fitted, as standard, with a really useful by-pass valve which makes it really easy to switch from the pre-rinse/wash mode (using normal city water) to the DI water mode for that all-important final rinse.

This is a vast improvement on the Spotless system available where you need to switch hoses. Our DI systems range from 5 GPM to 10 GPM (gallons per minute). Also, our new range of DI water products are now supplied with the quick release hose fittings.

Using a pressure washer on the outlet side of the DI tank will help to get the city water off quicker. Remember that it is advisable to only use DI water for the final rinse, to wash off the city rinse water. We recommend to use the lowest possible water pressure that your pressure washer will work with. Higher pressure will not improve the end result and will only use up your resin quicker.

We have videos on YouTube showing this great system at work. Please remember that all DI systems are not the same, some units use cheaper lower-grade resin. We have tested and used various resin mixes. Our DI resin is mixed to our own ratios and specification.